· Input: AC 90~265V 47~63HzÂ
· Output: DC 12V 30A; DC 24V 15A
Advantage:
· built-in EMI filterÂ
· 100% load testÂ
· Full range of input voltageÂ
· output voltage accurate and stableÂ
· Output over-voltage,  over-current and short-circuit protectionÂ
· Output low ripple and noiseÂ
· Two year warrantyÂ
· Average working no trouble >50, 000 hours
Â
| Product Electric Parameters | |||
| Input specification | Input voltage | AC90V---265V | |
| Input frequency | 47-63Hz | ||
| Input surge | 20A@120VAC  40A@230VAC | ||
| Output specification | Start-up time | <=1S (230V Input, Io=100%) | |
| keep time | >=20mS (230V Input, Io=100%) | ||
| Voltage regulation | (full)<=0.5% | ||
| Protection function | Overload protection | 105% - 150% rated power,  automatic recovery | |
| Protection type:Hiccup mode,recovers automatically after fault condition is removed | |||
| Over-voltage protection | 105% - 150% of the rated voltage | ||
| Protection type : Shut down o/p voltage, re-power on to recover | |||
| Insulation intensity | Input---output | 1500VAC/1min  | |
| Input--ground | 1500VAC/1min  | ||
| Output---ground | 500VAC/1min  | ||
| Environmental | working temperature | - 20 ° ~ 60 ° c / 20% ~ 90% RH (no frost) | |
| Storage temperature | - 40 ° ~ 85 ° c / 10% ~ 95% RH (no frost) | ||
| height above sea level | <=2000M | ||
| Structure | Size (mm) | 215*110*50mm | |
| Cooling method | Cooling method | Natural cooling air convection | |
| Weight | 0.88KG/PCS | ||
About Us:
a: 5-year manufacturer of LED Power Supply
b: Superior quality with competitive cost
c: Mature quality control system to ensure the defective rate be less than 0.2%
d: Specialized sales person to answer customer inquiry promptly and provide best solution
e: Professional person to provide dedicated aftersales service
Connection Instruction:
Warranty and Maintenance:
1. Warranty: 2Â years, since the date of purchase.
2. Under the terms of this warranty, if the product fails in normal usage within warranty period, we will provide free replacement based on the proof-documents.
3. If failure or damage is caused by incorrect operation, wire connection, or other unusual reason against product instruction, we will provide paid maintenance within warranty period.
4. After warranty period, paid maintenance and technical support are still available.
FAQ:
Q1. Is sample order available?
A: Yes, we welcome sample order to test and check quality.Â
Q2. What about the lead time?
A: Sample order: 3-5 days, mass order:10-15 days (depends on the order quantity).
Q3. How do you ship the goods and how many days will it take?
A: For small order, we mainly use DHL, FedEx, UPS and TNT, etc. It takes 3-7 days. For bulk order, sea shipping is the best with lowest cost, but takes more days.
Q4. Is it OK to use my own package and trade mark?
A: Yes. Normally we offer white inner box and carton box. Your own design is ok.
Q5: Does your company accept OEM?
A: Yes, welcome OEM!
So, please do not hesitate to contact us. 12V/24V 350W Switching Power Supply LED Driver for LED Strip Light CCTV Camera
· Input: AC 90~265V 47~63HzÂ
· Output: DC 12V 30A; DC 24V 15A
Advantage:
· built-in EMI filterÂ
· 100% load testÂ
· Full range of input voltageÂ
· output voltage accurate and stableÂ
· Output over-voltage,  over-current and short-circuit protectionÂ
· Output low ripple and noiseÂ
· Two year warrantyÂ
· Average working no trouble >50, 000 hours
Â
| Product Electric Parameters | |||
| Input specification | Input voltage | AC90V---265V | |
| Input frequency | 47-63Hz | ||
| Input surge | 20A@120VAC  40A@230VAC | ||
| Output specification | Start-up time | <=1S (230V Input, Io=100%) | |
| keep time | >=20mS (230V Input, Io=100%) | ||
| Voltage regulation | (full)<=0.5% | ||
| Protection function | Overload protection | 105% - 150% rated power,  automatic recovery | |
| Protection type:Hiccup mode,recovers automatically after fault condition is removed | |||
| Over-voltage protection | 105% - 150% of the rated voltage | ||
| Protection type : Shut down o/p voltage, re-power on to recover | |||
| Insulation intensity | Input---output | 1500VAC/1min  | |
| Input--ground | 1500VAC/1min  | ||
| Output---ground | 500VAC/1min  | ||
| Environmental | working temperature | - 20 ° ~ 60 ° c / 20% ~ 90% RH (no frost) | |
| Storage temperature | - 40 ° ~ 85 ° c / 10% ~ 95% RH (no frost) | ||
| height above sea level | <=2000M | ||
| Structure | Size (mm) | 215*110*50mm | |
| Cooling method | Cooling method | Natural cooling air convection | |
| Weight | 0.88KG/PCS | ||
About Us:
a: 5-year manufacturer of LED Power Supply
b: Superior quality with competitive cost
c: Mature quality control system to ensure the defective rate be less than 0.2%
d: Specialized sales person to answer customer inquiry promptly and provide best solution
e: Professional person to provide dedicated aftersales service
Connection Instruction:
Warranty and Maintenance:
1. Warranty: 2Â years, since the date of purchase.
2. Under the terms of this warranty, if the product fails in normal usage within warranty period, we will provide free replacement based on the proof-documents.
3. If failure or damage is caused by incorrect operation, wire connection, or other unusual reason against product instruction, we will provide paid maintenance within warranty period.
4. After warranty period, paid maintenance and technical support are still available.
FAQ:
Q1. Is sample order available?
A: Yes, we welcome sample order to test and check quality.Â
Q2. What about the lead time?
A: Sample order: 3-5 days, mass order:10-15 days (depends on the order quantity).
Q3. How do you ship the goods and how many days will it take?
A: For small order, we mainly use DHL, FedEx, UPS and TNT, etc. It takes 3-7 days. For bulk order, sea shipping is the best with lowest cost, but takes more days.
Q4. Is it OK to use my own package and trade mark?
A: Yes. Normally we offer white inner box and carton box. Your own design is ok.
Q5: Does your company accept OEM?
A: Yes, welcome OEM!
So, please do not hesitate to contact us.
What is a fiber optic slip ring?
A fiber optic slip ring is a device that allows for the transfer of data, power, and signals between two rotating objects. The ring is made up of one or more optical fibers that are used to transmit light signals. These signals can be used to send power, data, or other signals between the two objects. The fiber optic slip ring is a newer technology that has many benefits over traditional slip rings.
How do fiber optic slip rings work?
A fiber optic slip ring is a device that allows electric current and optical signals to pass through a rotating joint. This is often used in applications where it is necessary to transfer data or power between two stationary points while the object rotates. The fiber optic slip ring uses light rather than metal to conduct these signals, which makes it ideal for use in high-speed or hazardous environments.
Types of fiber optic slip rings
When it comes to telecommunications, fiber optics are king. They're the backbone of almost every network today, and they're getting faster and more reliable all the time. That's thanks in part to a technology called fiber optic slip rings.
Advantages of fiber optic slip rings
A fiber optic slip ring is a device used in optical communication. It is a component of many fiber optic networks and it allows for the transmission of data over long distances without losing signal quality. Fiber optic slip rings are also used to improve the performance of other optical systems.
Disadvantages of fiber optic slip rings
Fiber optic slip rings are growing in popularity for rotating applications. Fiber optic slip rings provide many advantages over traditional electrical slip rings, including much smaller size, weight, and power consumption. However, fiber optic slip rings also have a few disadvantages. One disadvantage is that they can be more expensive than traditional electrical slip rings. Additionally, fiber optic cables are more fragile than electrical cables, so they can be more susceptible to damage.
Conclusion: What are the benefits and drawbacks of fiber optic slip rings?
When it comes to fiber optic slip rings, there are both benefits and drawbacks to consider. On the one hand, fiber optic slip rings offer a number of advantages over traditional metal contact slip rings. They are lighter in weight, which makes them easier to install and transport. They also generate less heat, making them safer to use in hazardous environments. Additionally, they provide superior performance in terms of electrical noise and signal integrity.
However, fiber optic slip rings also have some drawbacks. They are more expensive than traditional metal contact slip rings, and they can be more difficult to repair if they malfunction. Additionally, they may not be suitable for some applications due to their limited range of motion.
Fiber Optic Slip Ring,Brass Slip Ring,Fiber Optic Silp Ring,Electrical Rotary Joint
Dongguan Oubaibo Technology Co., Ltd. , https://www.sliprob.com