Abstract: ApplicaTIon note 303 provides informaTIon on connecTIng the DS2151 and DS2153 single chip transceivers (SCTs) to a 16-bit DSP: the Analog Devices ADSP2181.
InterconnecTIons between the DS2151 or DS2153 parallel port and the Analog Devices ADSP-2181 non-multiplexed I / O port are shown in Figure 1. Refer to Application Note 326: Interfacing to a Nonmultiplexed Bus for further information.
Figure 1. Transceiver-ADSP2181 Interconnections.
InterconnecTIons between the DS2151 or DS2153 parallel port and the Analog Devices ADSP-2181 non-multiplexed I / O port are shown in Figure 1. Refer to Application Note 326: Interfacing to a Nonmultiplexed Bus for further information.
Figure 1. Transceiver-ADSP2181 Interconnections.
1. Can be fixed on two kinds of guide rails
2. Since it is inserted into the guide rail, the
terminal pressing block is absolutely reliable
3. The screws are not loose
1. Can be fixed on two kinds of guide rails
2. Since it is inserted into the guide rail, the
terminal pressing block is absolutely reliable
3. The screws are not loose
Two kinds of holders made from insulating
materials:
1. One layer holder AB/SS (with screws) for
one busbar.
2. Double layer holder AB2/SS which are
arranged staggered on both sides of the N-line
and PE-line busbars.
Busbar Marine Terminal Block,Screw Busbar Insulators,Electrical Drum Support Busbar,Battery Support Busbar
Wonke Electric CO.,Ltd. , https://www.wkdq-electric.com