Light-emitting diodes (LEDs) enable smaller notebooks with brighter displays | display devices and longer battery life, quickly replacing cold cathode fluorescent tubes (CCFLs) for LCDs used in notebook, industrial and medical displays The main backlight technology of the display (LCD). However, the use of LEDs in notebook LCDs presents technical challenges, such as noise and smear, which can affect the end user experience.
To help manufacturers solve these challenges, Freescale Semiconductor has introduced the MC34845 LED driver with high-speed pulse modulation (PWM). This six-channel device allows the LCD backlight to operate at frequencies outside the audio range, eliminating noise and smear. In addition, the accuracy and flexibility of the drive provides display consistency and a wide range of dimming to further enhance the end user experience.
The MC34845 LED driver is ideal for backlighting applications in notebook displays of more than 7-17 inches, as well as other applications that use multiple low-power LEDs (such as lighting products).
According to a survey by DisplaySearch, the popularity of LED backlights in large (10-inch and above) thin-film transistor (TFT) LCDs is expected to increase from around 7% in the fourth quarter of 2008 to 23% in the fourth quarter of 2009. By 2012, more than half of large TFTLCDs and all notebooks will use LED backlighting.
Factors driving the rapid adoption of LED backlight technology include: energy-saving operation that extends battery life; and the ability to design smaller displays for smaller, lighter notebooks. LED backlighting is an environmentally friendly solution compared to CCFL displays that contain mercury.
According to Micha EL Jennings, Freescale's Analogue Division of Analog Signals for Power Signals and Power Management, "The outstanding performance, accuracy and flexibility of the MC34845 driver helps manufacturers avoid LED drivers operating at lower frequencies." Numerous issues. Advanced technologies such as MC34845 will help drive LED backlighting in the global notebook market."
The high speed LED driver supports PWM up to 100kHz and pulse widths down to 200ns. This feature is suitable for achieving a 1000:1 dimming range at the 25 kHz frequency level and provides excellent linearity in this range, supporting very fine dimming initiatives. The driver is also very accurate, supporting ±2% maximum current matching over the -40 to +85° operating temperature, which helps to improve display consistency. It uses a single direct drive PWM input to drive the output.
The MC34845 also uses a boost converter to generate the required voltage to power the LED. Both versions can be used for the boost switching frequency of 600Khz (MC34845) or 1.2MHz (MC34845A). The input range supports 2 and 3 cell Li-Ion or fixed input power | regulators. The high-voltage output capability allows the device to drive 96 white LEDs with more drivers than the competing 6-channel design. The dynamic margin control automatically sets the output voltage according to the voltage requirements of the LED.
The MC34845 supports low-power shutdowns with a maximum supply current of only 1uA. In addition, with the automatic shutdown mode, the device shuts down after the PWM input is inactive for a certain period of time.
Features of the MC34845 product:
?; input voltage range: 5V~21V
2.0A integrated boost
?; switching frequency: 600kHz (MC34845)
?; Switching frequency: 1.2MHz (MC34845A)
?; output voltage: up to 60V
LED current: up to 30mA
?; current matching: ± 2%
Direct PWM input control
?;PWM frequency: up to 100kHz
?; dimming range: 50000:1
?; minimum pulse: 200ns
Dynamic margin control
?;LED open / short circuit protection
User-programmable OVP
?; OTP, OCP, UVLO fault detection
?; Shut down below 1mA
?; 24-pin QFN package: 4 mm × 4 mm × 0.65 mm
Pricing and availability information
Freescale is currently offering samples of the MC34845 (9600kHz boost) and MC34845A (1.2MHz boost) LED drivers. The suggested retail price is $1.15 when the number of two devices reaches 10,000.
To help manufacturers solve these challenges, Freescale Semiconductor has introduced the MC34845 LED driver with high-speed pulse modulation (PWM). This six-channel device allows the LCD backlight to operate at frequencies outside the audio range, eliminating noise and smear. In addition, the accuracy and flexibility of the drive provides display consistency and a wide range of dimming to further enhance the end user experience.
The MC34845 LED driver is ideal for backlighting applications in notebook displays of more than 7-17 inches, as well as other applications that use multiple low-power LEDs (such as lighting products).
According to a survey by DisplaySearch, the popularity of LED backlights in large (10-inch and above) thin-film transistor (TFT) LCDs is expected to increase from around 7% in the fourth quarter of 2008 to 23% in the fourth quarter of 2009. By 2012, more than half of large TFTLCDs and all notebooks will use LED backlighting.
Factors driving the rapid adoption of LED backlight technology include: energy-saving operation that extends battery life; and the ability to design smaller displays for smaller, lighter notebooks. LED backlighting is an environmentally friendly solution compared to CCFL displays that contain mercury.
According to Micha EL Jennings, Freescale's Analogue Division of Analog Signals for Power Signals and Power Management, "The outstanding performance, accuracy and flexibility of the MC34845 driver helps manufacturers avoid LED drivers operating at lower frequencies." Numerous issues. Advanced technologies such as MC34845 will help drive LED backlighting in the global notebook market."
The high speed LED driver supports PWM up to 100kHz and pulse widths down to 200ns. This feature is suitable for achieving a 1000:1 dimming range at the 25 kHz frequency level and provides excellent linearity in this range, supporting very fine dimming initiatives. The driver is also very accurate, supporting ±2% maximum current matching over the -40 to +85° operating temperature, which helps to improve display consistency. It uses a single direct drive PWM input to drive the output.
The MC34845 also uses a boost converter to generate the required voltage to power the LED. Both versions can be used for the boost switching frequency of 600Khz (MC34845) or 1.2MHz (MC34845A). The input range supports 2 and 3 cell Li-Ion or fixed input power | regulators. The high-voltage output capability allows the device to drive 96 white LEDs with more drivers than the competing 6-channel design. The dynamic margin control automatically sets the output voltage according to the voltage requirements of the LED.
The MC34845 supports low-power shutdowns with a maximum supply current of only 1uA. In addition, with the automatic shutdown mode, the device shuts down after the PWM input is inactive for a certain period of time.
Features of the MC34845 product:
?; input voltage range: 5V~21V
2.0A integrated boost
?; switching frequency: 600kHz (MC34845)
?; Switching frequency: 1.2MHz (MC34845A)
?; output voltage: up to 60V
LED current: up to 30mA
?; current matching: ± 2%
Direct PWM input control
?;PWM frequency: up to 100kHz
?; dimming range: 50000:1
?; minimum pulse: 200ns
Dynamic margin control
?;LED open / short circuit protection
User-programmable OVP
?; OTP, OCP, UVLO fault detection
?; Shut down below 1mA
?; 24-pin QFN package: 4 mm × 4 mm × 0.65 mm
Pricing and availability information
Freescale is currently offering samples of the MC34845 (9600kHz boost) and MC34845A (1.2MHz boost) LED drivers. The suggested retail price is $1.15 when the number of two devices reaches 10,000.

To use these connectors, the ribbon cable is inserted into the Ribbon Connector and the connector is then plugged into the Ribbon Connector on the circuit board. The connectors are designed to provide a secure and reliable connection that can withstand repeated insertions and removals.
Overall, the 2.54mm Ribbon Connectors are an essential component in many electronic devices that require a reliable and secure connection between the ribbon cable and the circuit board.
2.54Mm Ribbon Connector,Pressure Welding Bar Connector,Pressure Welding Bar Connectors,Welding Bar Connector
YUEQING WEIMAI ELECTRONICS CO.,LTD , https://www.weimaiconn.com