On May 4, Infineon Electronics (Hangzhou) Co., Ltd. announced the introduction of TRI1311, a constant current LED driver control chip compatible with TRIAC dimming. Its innovative Bleeder circuit compensation method enables the driver to have higher dimmer compatibility and phase. Higher system efficiency than traditional solutions.
In low-power TRIAC dimming applications (such as bulbs, candle lights, downlights, etc.), INV1311 has a significant price/performance advantage over current mainstream dimming solutions. The INV1311 integrates a variety of protection functions such as driver load open circuit protection, output short circuit protection, VCC undervoltage lockout and cycle-by-cycle current limit, which greatly enhances the safety and reliability of the LED driver. In addition, the critical conduction mode used by the INV1311 also contributes to system efficiency improvement and EMI noise suppression. The INV1311 is packaged in MSOP10 and is suitable for single-stage Fly-back and Buck-boost topologies.
When the TRIAC dimmer is matched with the LED driver, the current at the input of the driver is lower than the minimum holding current of the thyristor, and the dimming problem of the LED caused by the thyristor erroneous shutdown makes the LED driver suitable for thyristor dimming. The design of the scheme is difficult, and the problem of high cost, low efficiency or poor dimmer compatibility has been encountered in the promotion process. INV1311 has been optimized for dimmer compatibility, achieving compatibility with more than 90% of dimmers on the market, no flicker, high efficiency, good dimming comfort and brightness consistency. .
The patented constant current technology of INV1311 eliminates the need for optocoupler feedback to adjust the load current. By sampling the current of the switch tube, the LED output current can be accurately controlled, which greatly reduces the design difficulty and implementation cost of the driver. In combination with Infineon's latest ripple suppression chip INV3121/INV3123, it provides customers with a complete set of cost-effective and attractive driver solutions in the field of small and medium power LED indoor lighting.
Infinet said that the series is already in mass production and accepts order bookings.
In low-power TRIAC dimming applications (such as bulbs, candle lights, downlights, etc.), INV1311 has a significant price/performance advantage over current mainstream dimming solutions. The INV1311 integrates a variety of protection functions such as driver load open circuit protection, output short circuit protection, VCC undervoltage lockout and cycle-by-cycle current limit, which greatly enhances the safety and reliability of the LED driver. In addition, the critical conduction mode used by the INV1311 also contributes to system efficiency improvement and EMI noise suppression. The INV1311 is packaged in MSOP10 and is suitable for single-stage Fly-back and Buck-boost topologies.
When the TRIAC dimmer is matched with the LED driver, the current at the input of the driver is lower than the minimum holding current of the thyristor, and the dimming problem of the LED caused by the thyristor erroneous shutdown makes the LED driver suitable for thyristor dimming. The design of the scheme is difficult, and the problem of high cost, low efficiency or poor dimmer compatibility has been encountered in the promotion process. INV1311 has been optimized for dimmer compatibility, achieving compatibility with more than 90% of dimmers on the market, no flicker, high efficiency, good dimming comfort and brightness consistency. .
The patented constant current technology of INV1311 eliminates the need for optocoupler feedback to adjust the load current. By sampling the current of the switch tube, the LED output current can be accurately controlled, which greatly reduces the design difficulty and implementation cost of the driver. In combination with Infineon's latest ripple suppression chip INV3121/INV3123, it provides customers with a complete set of cost-effective and attractive driver solutions in the field of small and medium power LED indoor lighting.
Infinet said that the series is already in mass production and accepts order bookings.
Yacenter hook-up wire and lead wire is manufactured to strict industry specifications. Our collection of hook-up wire and lead wire may be applied for electronic use where high temperatures are encountered. PTFE Coated hook-up wire possesses excellent resistance to thermal aging, solder iron damage, flame, and moisture. Allied Wire offers electrical wire in a range of insulating materials, colors and sizes. Insulating materials include PVC, Irradiated PVC, Irradiated Polyolefin and PTFE. AWC hook-up wire products efficiently answer marketplace demands.
Lead Wire,Balloon Detonator Wire,Ph Connector Harness,Fan Wiring Harness
Dongguan YAC Electric Co,. LTD. , https://www.yacentercns.com