Reasons to purchase
The family has deployed six types of network cables, but the used millet router 3 does not support wired Gigabit, and the mind has always wanted to replace the 1T hard disk version of the millet router 2, 599 yuan, but it is unpleasant that its usb interface is 2.0 . Concerned about the recent launch of the millet router Pro version, is usb3.0 interface, see CPU and memory are not small, decisive in the first time orders. (You can say your own buying needs, comparison experience, and final choice reasons)
Appearance Gallery
No problems with packaging, I think that as long as the equipment is protected, the appearance is not too ugly is a good package:
There is an installation instruction manual in the envelope that is lifted up on the side. The illustration is full of illustrations. As long as you read with patience, there is no big problem for the novice. To set up a router, the most important thing is patience. For example, if you use a mobile phone to set up a router, the first step is to connect to the wifi signal, and then be sure to wait 10 to 20 seconds at this time, and then it will pop up the setting guide, and you can set it according to the prompt step by step. Some people do not have the patience to wait in this step, do other operations directly, this time do other operations, the router signal will be disconnected, and then can not continue to operate.
Four non-slip mats on the back.
One Gigabit WAN port and three Gigabit LAN ports:
A blue USB 3.0 interface, this is the only reason I chose this router, but did not choose Xiaomi router 2 (Gigabit hard disk version). But in fact it is very worried about the conflict between USB3.0 and 2.4Gwifi. The fact of this conflict exists. Before the receipt of the goods, the parties' evaluations are waiting to see how Xiaomi handled the conflict. I will say it right away.
Compared to the size of the millet router 3, the size of the top view is almost the same.
I have been using Seagate's 5T Backup Pro hard drive. When I bought this hard drive, I was still using the millet router mini. Before I bought the hard disk, I consulted the various online shops and millet before sale. Whether the USB 2.0 port on the router can be used to mount 5T The hard disk (although there is an independent power supply), almost all pre-sale can not give a precise reply. I can only try to buy it myself, but the result is supportive, but it seems that the millet router mini is not as stable as before, and it only takes a few minutes to restart. After changing the millet router 3 still use this 5T hard disk, obviously feel stable, and not restart the router can last many days smooth. Today, I replaced this millet router with Pro. The experience is that even if I hang up the hard disk, it is obviously much faster when I open the router's APP to manage the hard disk on the mobile phone (of course, this also has the merit of mu-mimo, the intranet wireless becomes faster).
The hard drive of the router and USB3.0 interface is close, just to see how serious the interference of the legendary USB3.0 and 2.4G wifi is.
Test the transmission performance of 5G at close range with Mac's time machine:
The above are all used under the connection of 5G wifi.
Just think of it and carefully study the difference between the APP and the previous router, and find two small differences.
One is the mu-mimo switch in the wifi settings.
One is more of this USB3.0 switch. At this point, it was understood that the original was unable to avoid the conflict between USB3.0 and 2.4G wifi. The expedient measure actually reduced USB3.0 to 2.0 mode. But in fact, in order to test how serious the conflict is, I intentionally kept the 3.0 model on and intentionally connected the laptop and mobile phone to the 2.4G network. For the time being, it took half a day and I didn't feel it for the time being. Obvious decline in network quality. The original data cable of Seagate is used. The cable length is close to one meter. The router and the hard disk are in close proximity, intentionally maximizing the interference.
to sum up
Millet Router Pro Edition, compared to previous Millet Router 3, Millet Router 2 (1T Hard Disk Edition)
advantage:
The mobile phone APP obviously feels that the loading speed becomes faster when managing the remote hard disk.
Compared to 3, Pro is a full-gigabit cable, and the family's millet TV is connected by gigabit cable. Specifically, trying to read a 10G video, you can feel a bit faster than Xiaomi Router 3.
Compared to 2, Pro is USB3.0.
Disadvantages:
Compared to 2, a Gigabit cable port is missing. If you can have four thousand LAN ports as well as two, you can use one gigabit switch less in many people's scenarios.
Is it worth buying?
• If you have millet router 3 before and your home does not have a Gigabit 6 cable, then you do not need to purchase it. The worthwhile plan is to buy the two millet routers 3 and connect them with a wired connection. The whole house signal is evenly covered.
· If you have millet router 2 before, you don't need to change to Pro in the short term.
· If you have Internet access in your hands are new, iPhone 6S or newer phone, the latest laptop. And there are many smart home devices in the home. Buying this router for mu-mimo is worth it.
PS. Also read some articles about mu-mimo on the Internet. The principle is that even if the device does not support this technology, the wifi effect will be improved.
Residual Current Circuit Breaker With Over Load Protection
TWO FUNCTION : MCB AND RCCB FUNCTIONS
leakage breaker is suitable for the leakage protection of the line of AC 50/60Hz, rated voltage single phase 240V, rated current up to 63A. When there is human electricity shock or if the leakage current of the line exceeds the prescribed value, it will automatically cut off the power within 0.1s to protect human safety and prevent the accident due to the current leakage.
leakage breaker can protect against overload and short-circuit. It can be used to protect the line from being overloaded and short-circuited as wellas infrequent changeover of the line in normal situation. It complies with standard of IEC/EN61009-1 and GB16917.1.
RCBO,ELCB,Leakage Circuit Breaker,Residual Current Circuit Breaker,Residual Current Circuit Breaker with Over Load Protection 1p,Residual Current Circuit Breaker with Over Load Protection 2p
Wenzhou Korlen Electric Appliances Co., Ltd. , https://www.zjaccontactor.com