Series of Replacement Auto Wire Connectors for Brands Like AMP, Fci, Delphi, Yazaki, Sumitomo, Deutsch, Bosch

Product Photo~


More Products~


Our service~
1. Our company is professional manufacturer of connectors and harness with over 20 years' development.
 
2. We agent brand connectors as TYCO, MOLEX, DELPHI, FCI, LEAR, SUMITOMO, YAZAKI, MITSUBISHI, JST, JAE, KET and KUM etc.
 
3. Your inquiry will be replied within 24 hours.
 
4. Our delivery time is usually 7-15 days, we will contact if there are special circumstances.
 
5. OEM & ODM is welcomed.
 
6. We can do the product based on your drawing, sample or indicated details.
FAQ~
1.Q:  How can I get the samples?
A:  You can get samples for free, but you should offer the delivery cost of samples generally.
 
2.Q:  How are the qualities of your products?
A:  Most products have passed certification as ISO9001, TS16949.
 
3.Q:  Do you only have these types of products? If your products are not my need, what should I do?
A:  No, they are parts of our products. Pls send us your inquiry with product details, then we will give you solution within several hours. Or call us right now.
 
4.Q:  Where is your company located?
A:  Our company is locatedin 3/F, No.39, Sanheng Road, Shijing Town, Baiyun District, Guangzhou City, China. Warmly welcome to visit us!
                             

                                           Welcome to your inquiry! Product Photo~


More Products~


Our service~
1. Our company is professional manufacturer of connectors and harness with over 20 years' development.
 
2. We agent brand connectors as TYCO, MOLEX, DELPHI, FCI, LEAR, SUMITOMO, YAZAKI, MITSUBISHI, JST, JAE, KET and KUM etc.
 
3. Your inquiry will be replied within 24 hours.
 
4. Our delivery time is usually 7-15 days, we will contact if there are special circumstances.
 
5. OEM & ODM is welcomed.
 
6. We can do the product based on your drawing, sample or indicated details.
FAQ~
1.Q:  How can I get the samples?
A:  You can get samples for free, but you should offer the delivery cost of samples generally.
 
2.Q:  How are the qualities of your products?
A:  Most products have passed certification as ISO9001, TS16949.
 
3.Q:  Do you only have these types of products? If your products are not my need, what should I do?
A:  No, they are parts of our products. Pls send us your inquiry with product details, then we will give you solution within several hours. Or call us right now.
 
4.Q:  Where is your company located?
A:  Our company is locatedin 3/F, No.39, Sanheng Road, Shijing Town, Baiyun District, Guangzhou City, China. Warmly welcome to visit us!
                             

                                           Welcome to your inquiry!

1000M Ethernet Switch

In-vehicle Ethernet
The traditional Ethernet protocol uses carrier monitoring multiple access and conflict detection technology. Therefore, the real-time requirements of the vehicle-mounted network are not met in terms of packet delay, sequencing and reliability. Therefore, the common vehicle-mounted local area network is still a real-time fieldbus protocol based on CAN. However, with the explosive development of automotive electronics technology, the number of ECUs continues to grow, and audio-visual entertainment signals are also incorporated into in-vehicle communication, which makes the traditional high-real-time, low-bandwidth vehicle bus unsuitable for the development trend of automotive electronics.
The International Institute of Electrical and Electronic Engineers (IEEE) approved the first automotive Ethernet standard "100BASE-T1" in 2016 after long-term research. It is based on Broadcom's BroadR.Reach solution and uses a single pair of unshielded twisted pairs at the physical layer. Wire and cable, using a more optimized scrambling algorithm to reduce signal correlation and increase real-time performance, which can provide 100Mbps high real-time bandwidth in the car.
The communication quality of high-speed Ethernet in the environment of automobile interference is an issue that needs to be examined. Especially for the 100BASE.T1 network, unshielded cables are used, which are more susceptible to current surges and electromagnetic interference, resulting in unstable performance and even functional failure. At present, there is a conformance test method based on the Ethernet physical layer, which is used to test the return loss, timing jitter, and maximum output drop of signal transmission equipment; the RFC2544 standard provides Ethernet delay, throughput, and packet loss rate. Test methods for performance indicators; but these common methods are based on traditional Ethernet, do not support 100BASE-TI automotive Ethernet, and do not take into account the interference characteristics of the automotive environment.

Sfp Fiber Port,1000M Switch,1000M Ethernet Switch,Gigabit Switch

Shenzhen GL-COM Technology CO.,LTD. , https://www.szglcom.com