[Global Technology Reporter Wang Huan] According to a report from Japan’s Kyodo News on May 24, Toshiba’s semiconductor subsidiary, “Toshiba Memory†(located in Tokyo), which is in the process of operating the restructuring period, is promoting the sale process, and learned on the 24th that Toshiba U.S. Western Digital Corporation (WD), which jointly invests in Yokkaichi City, Mie Prefecture, has proposed to spend a total of 2 trillion yen (approximately RMB 132 billion) for the acquisition. Toshiba expressed its dilemma. President Gang Gangzhi will hold talks with WD CEO Steve Milligan in the afternoon to try to break the deadlock.
According to relevant sources, the proposed content is that WD spent 1.5 trillion yen to obtain preferred stock that can be converted into common stock, and the industrial innovation agency and Japan Policy Investment Bank contributed a total of 500 billion yen in common stock. It is reported that its plan is to take the lead from the "special purpose company" (SPC) to take over the acquisition of Toshiba memory, after a few years WD received ordinary shares. WD will also inquire about cooperation intentions from industrial innovation agencies and political investment banks.
WD's proposal may be blocked in the review of anti-monopoly law in relevant countries. If the subsidiary is not sold in a timely manner, Toshiba will not be able to get out of the debt insolvency situation and may be forced to delist. Therefore, Toshiba is quite wary of this.
On the other hand, WD had objected to Toshiba’s plans to accept further loans from the bank’s Toshiba memory shares as a guarantee, but it now seems to have been agreed. According to analysis, this may be because WD fears that if it continues to be opposed to Toshiba, the negative impact on the business may be further expanded.
Toshiba Memory is engaged in the "flash memory" storage media for smartphones, and its market share ranks second in the world. Toshiba’s bidding activities included the participation of KKR, Bain Capital, and Sharp’s parent company Hon Hai Precision Industry in Taiwan.
Vibration Motor is in the original basis to add a vibrating head, made into a Dc Motor drive with a vibration motor. To produce the shaking force.
6V Dc Vibration Motor is introduced:
6V Dc Vibration Motor volume is generally greater than 15 mm, mainly used in massage chair, massage waist, handheld massager, etc.
Characteristics: small volume, strong vibration;
Features: small size, fast speed, stable performance, low price, can use battery drive,Can change the different materials of the pendulum head
Method of use: the best stable in horizontal plane, installed on the dc 6V Dc Vibration Motor output shaft parts, cannot use a hammer to knock, knock prone to press into the dc 6V Dc Vibration Motor drive, may cause damage to internal components, and cannot be used in the case of blocked.
Operating temperature range:
6V Dc Vibration Motor should be used at a temperature of -10~60℃.
The figures stated in the catalog specifications are based on use at ordinary room temperature catalog specifications re based on use at ordinary room temperature (approximately20~25℃.
If a vibration motor is used outside the prescribed temperature range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.Depending on the temperature conditions ,it may be possible to deal with them by changing the grease of the motor's parts.Please feel free to consult with us about this.
Storage temperature range:
Dc Vibration Motor should be stored ta a temperature of -15~65℃.
In case of storage outside this range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.
Service life:
The longevity of Dc Vibration Motor is greatly affected by the load conditions , the mode of operation,the environment of use ,etc.Therefore,it is necessary to check the conditions under which the product will actually be used .The following conditions will have a negative effect on longevity.Please consult with us should any of them apply.
â—Use with a load that exceeds the rated torque
â—Frequent starting
â—Momentary reversals of turning direction
â—Impact loads
â—Long-term continuous operation
â—Forced turning using the output shaft
â—Use in which the permitted overhang load or the permitted thrust load is exceeded
â—A pulse drive ,e.g.,a short break,counter electromotive force,PWM control
â—Use of a voltage that is nonstandard as regards the rated voltage
â—Use outside the prescribed temperature or relative-humidity range,or in a special environment.
â—Please consult with us about these or any other conditions of use that may apply,so that we can be sure that you select the most appropriate model.
when it come to volume production,we're a major player as well .each month,we rurn out 600000 units,all of which are compliant with the rohs directive.Have any questions or special needed, please contact us, we have the engineer group and best sales department to service to you Looking forward to your inquiry. Welcome to our factory.
6V Dc Vibration Motor,Dc Vibration Motor,6V Dc Micro Vibration Motor,Small Size 6V Dc Vibration Motor
Shenzhen Shunchang Motor Co., LTD. , https://www.scgearmotor.com