What is a dual port information outlet? Double port information socket wiring method introduction

In our impression, the sockets are generally installed on the wall and can be used to plug in the electrical sockets. But today we are specifically introducing a dual-port information socket, which is mainly used in conjunction with computers. The information devices are used by each other and are divided into two ports. One port is a data port, and the other port is a voice port. As the name implies, it can transmit information data and can also transmit voice material. It is a multifunctional socket and is of interest. Friends may wish to take a look at the following to learn about the multi-faceted information socket and their wiring methods.

First, what is the dual port information socket?

The information socket not only makes the wiring system more flexible and standardized, but also makes the overall space layout more beautiful and concise, and does not affect the original layout and style of the room. In addition, the single-port information socket has only one information socket on one panel as the name implies; the two-port information socket has two information sockets on one panel. The main purpose of desktop and ground type information outlets in a few cases is to facilitate the movement of devices such as computers and to maintain the aesthetics of the entire wiring.

Second, dual port information socket wiring method

Compared with the single-port information socket, the dual-port information socket has won the favor of more people. So how to terminate the dual-port information socket?

Let us first prepare the tools we need. Cable termination tools and wire tools are required to terminate the information module. The cable preparation tool is also called a stripping knife. Its main function is to peel off the insulation outside the twisted pair. Using it for stripping is not only faster than using a crimping tool, but it is also safer and generally does not damage the insulation of the wrapped core. The wire bonding tool is used to push the twisted pair into the module and cut off the excess wire ends.

Once the tool is ready, let's start to terminate the dual port information outlet.

1. Pull the twisted pair cable out of the wiring back box and cut it to the appropriate length. Use a cable preparation tool to strip the insulation layer and then cut off the tensile wire with scissors.

2. Place the RJ-45 interface of the information module down on a hard surface such as a desktop or a wall.

3. Separate the four pairs of wires in the network cable, but do not disassemble them between the pairs. According to the line sequence indicated on the information module, put the wires into the corresponding slots one by one. According to the T568B standard connection method, the information socket pin (foot) and twisted pair cable pair are distributed as follows: line pair 1 (blue-4, white blue-5), line pair 2 (white orange-1, orange - 2), line pair 3 (white green-3, green-6), line pair 4 (white brown-7, brown-8).

4. Align the edge of the wire-punching tool with the wire slot and wire on the information module, and apply force vertically. When you hear a click, the extra line outside the module will be cut. Repeat this operation, you can enter 8 cores into the slot of the corresponding color one by one.

5. Insert the plastic dustproof piece of the module into the module along the notch and firmly fix it on the information module. The module is terminated.

6. Insert the information module into the corresponding slot in the information panel, and then secure the panel to the bottom box of the information socket with screws to complete the termination of the information socket.

In addition, in order to facilitate termination, repair and change, after the cable is pulled out from the bottom box, it is best to reserve about 15cm, and then cut off the excess. The dual-port information socket is widely used, whether it is in the integrated wiring of large and medium-sized networks, or in the process of building SOHO and home network, it will involve the termination of the dual-port information socket.

The above is the information about what the information socket is for you and the information socket wiring. I hope to help you.