Sanan Optoelectronics LED Industry Project started in Tianjin High-tech Zone


On April 27th, Sanan Optoelectronics Tianjin LED Industrialization Project started in the High-tech Zone, and Vice Mayor Wang Zhiping attended the groundbreaking ceremony.

According to reports, Fujian Sanan Group Co., Ltd. was established in October 1992, is the world's largest professional full-color ultra-high brightness light-emitting diode (LED) epitaxial wafer, chip, solar cell, optical communication core components and other product development and The production of high-tech enterprises, the world-class optoelectronic technology research and development and industrialization base, product technology indicators have reached the world's advanced level, selling at home and abroad. Sanan Group has developed into a diversified and cross-regional enterprise group integrating various industries such as steel metallurgy, optoelectronics, mining, and trade. Since 2008, it has created a tax of more than 320 million yuan per year. Established in November 2000, Sanan Optoelectronics Co., Ltd. is the earliest, largest and best quality full-color ultra-high brightness LED epitaxial and chip industrial production base in China. It is a national high-tech industry approved by the National Development and Reform Commission. The demonstration project, the leading company of semiconductor lighting engineering recognized by the Ministry of Science and Technology and the Ministry of Information Industry, and the strategic partner confirmed by the Aerospace Department. Through years of unremitting efforts, the company has achieved an annual production capacity of 550,000 epitaxial wafers and 16 billion wafers. At present, it accounts for more than 58% of the total domestic production capacity, ranking first in the country. The company has a modern clean factory from 1000 to 10,000, and hundreds of sets of the most advanced LED epitaxial growth and chip manufacturing equipment at home and abroad. The company's gross profit margin is as high as 48.5%. The company's R&D team consists of top-notch optoelectronic technicians at home and abroad and has obtained 17 patents.

It is understood that the Sanan Optoelectronic LED project in the high-tech zone is located in Huayuan Industrial Zone (outside the ring), covering an area of ​​about 600 acres. The project will be implemented in three phases. The investment amount of the first phase of the project company is 1 billion yuan, and the investment of the second phase project company is 3 billion yuan. After the investment of the second phase project company is completed, the third phase project company will be implemented. The construction of 600 mu of land in the project is basically completed within three years. Within 5 years after putting into production, according to the actual occupied land area, the output value will not be less than 15 million yuan per mu, and the tax revenue is not less than 500,000 yuan per mu.

2009 LED seminar expert PK grand event record
[Think of after attending the LED seminar]
[Comparative: LED light source for CREE and lumileds]
[What is the standard for evaluating the design of street lamps? ]
[ LED: Corporate Fever Chasing and Expert Cold Eye Criticism]
[Architect sketch master sketchup5.0 crack version]
[ Product evaluation: SIMES FLAT buried lights]




1

510 Cartridge

·Basic precautions

Do not put expensive oil into low-quality cartridges to avoid wastage. Most pre-filled oil cartridges have the so-called 510 thread. The oil cartridge screws onto a rechargeable battery. Some of these batteries have buttons and some heat up automatically when you pump the oil. Some batteries have multiple temperature settings and some heat up to a preset temperature; these features need to be known in advance.

·Cleaning notes

Use a suitable cleaning tool to clean them, such as activated charcoal or dried tea leaves in a used pipe to absorb the oil. It is important not to use alcohol or other boiling water to clean the pipe, and to wait until it has cooled down completely before cleaning. Otherwise, the hot stem will come into contact with the watery liquid and cause the mouthpiece tenon to loosen, thus shortening the life of the 510 cartridges.

This is what you should be aware of when using 510 cartridges. At the same time, when using 510 cartridges, there are still some vaping tips, for example, when using them, be careful not to suck too hard, will not produce smoke. When you inhale too hard, the smoke is sucked directly into your mouth and not atomized by the atomizer, so gently inhaling is more powerful and gives you a better vaping experience.

510 Cartridge Oem,Leakproof 510 Cartridge,510 Battery And Cartridges Oem,510 Cartridge

Shenzhen MASON VAP Technology Co., Ltd. , https://www.disposablevapepenfactory.com