Kai Bor Q7 latest firmware V2.6
1, Added NFS support for Windows version, enabled NFSv3/v4 support
2ã€Additionally distinguish nfs/smb when manually adding devices
3, Fix the bug that the automatically searched server list can perform the operation of deleting the device and cause the program to crash
4, optimize some 3D Blu-ray Caton problems
5, Added driver support for EMMC storage
6, optimize the upgrade program
7, fix the color difference output
This is a complete line brush firmware package, the network is pushing the incremental package that is card brush package, I hope there is a clean and stable system or line brush it. (Of course if you are in trouble, choose to upgrade online)
Q7 line brush firmware package V2.6 download: http://bbs.shafa.com/thread-1276453-1-1.html
Here I will introduce to you how to brush Q7 firmware
The line brush is to use the USB cable with the brush machine tool to brush machine, if the box can not boot because of a fault, we can also use the line brush to save.
The line brush is an official Brush method. It will completely format the system and the disk, and rewrite the main board and baseband information to make the system cleaner and more stable.
First prepare a dual-head USB cable for use
Enter the brush step below
1. Download the wire brush tool to the computer (it is recommended to locate the desktop for easy search), unpack and run PhoenixSuit_EN to install, and at the same time, the wire brush tool will automatically install the necessary driver for the brush.
Q7 latest line brush tool PhoenixSuit V1.0.8
II. Run PhoenixSuit Brush Tool, click a button Brush (pull out other USB devices before the brush)
Three. Click Browse to select the Q7 firmware file
4. Use a dual-headed USB data cable to connect the computer first (note: be sure to connect the USB port on the back of the computer case). Then use a toothpick to hold the RESET button next to the fiber optic connector behind the Q7, and plug the other end of the USB data cable into the Q7's first USB connector (that is, the one that doesn't connect to the antenna in front).
At this time, the system will prompt whether or not to force the format, choose yes, start the machine. (Q7 doesn't need to connect power supply when flashing)
V. Now start burning firmware
6. The firmware is successfully written!
Finally, I wish the majority of Q7 machine friends brush machine happy! ! !
1, Added NFS support for Windows version, enabled NFSv3/v4 support
2ã€Additionally distinguish nfs/smb when manually adding devices
3, Fix the bug that the automatically searched server list can perform the operation of deleting the device and cause the program to crash
4, optimize some 3D Blu-ray Caton problems
5, Added driver support for EMMC storage
6, optimize the upgrade program
7, fix the color difference output
This is a complete line brush firmware package, the network is pushing the incremental package that is card brush package, I hope there is a clean and stable system or line brush it. (Of course if you are in trouble, choose to upgrade online)
Q7 line brush firmware package V2.6 download: http://bbs.shafa.com/thread-1276453-1-1.html
Here I will introduce to you how to brush Q7 firmware
The line brush is to use the USB cable with the brush machine tool to brush machine, if the box can not boot because of a fault, we can also use the line brush to save.
The line brush is an official Brush method. It will completely format the system and the disk, and rewrite the main board and baseband information to make the system cleaner and more stable.
First prepare a dual-head USB cable for use
Enter the brush step below
1. Download the wire brush tool to the computer (it is recommended to locate the desktop for easy search), unpack and run PhoenixSuit_EN to install, and at the same time, the wire brush tool will automatically install the necessary driver for the brush.
Q7 latest line brush tool PhoenixSuit V1.0.8
II. Run PhoenixSuit Brush Tool, click a button Brush (pull out other USB devices before the brush)
Three. Click Browse to select the Q7 firmware file
4. Use a dual-headed USB data cable to connect the computer first (note: be sure to connect the USB port on the back of the computer case). Then use a toothpick to hold the RESET button next to the fiber optic connector behind the Q7, and plug the other end of the USB data cable into the Q7's first USB connector (that is, the one that doesn't connect to the antenna in front).
At this time, the system will prompt whether or not to force the format, choose yes, start the machine. (Q7 doesn't need to connect power supply when flashing)
V. Now start burning firmware
6. The firmware is successfully written!
Finally, I wish the majority of Q7 machine friends brush machine happy! ! !